Buzzer Alarm
Liquid Leak Sensor
The Buzzer Alarm Series provides quick leak detection with an audible alarm system. For use with corrosive liquids. Atmosphere resistant and completely waterproof.
Specification Charts:
RS-3000 /3500FAP-BZ Detection Unit Specification
RS-3000 Series Control Unit Specification
RS-3500 Series Control Unit Specification
Product Operation Manuals:
RS-3000/3500 FAP-BZ Detection and Control Unit
RS-3000/3500FAP-BZ Detection Unit
Buzzer Alarm Liquid Leak Sensor
- Quick detection by spot where the liquid leakage occurs.
- RS-3000FAP-BZ (NPN OUTPUT) & RS-3500FAP-BZ (PNP OUTPUT) are suitable for the large scale and complex factory.
- Alarm beep freeze when detection are taken out of Bracket.
- In a complex and large factory, “sound” saves time for locating where the leakage happens.
- RS-3500 matches with safety circuit design of zero voltage common grounded as PNP configuration is so.
- Using Control unit of RS-3500C, you can choose a neutral relay contact output. Furthermore RS-3500C provides a logically accumulated output from 8 input signal sources to one output, this is the same idea of RS-3000C.
| RS-3000/3500FAP-BZ Detection Unit Specification | |||||||
| RS-3000FAP-BZ | RS-3500FAP-BZ | ||||||
| Supply Voltage | 24 VDC ± 10% | ||||||
| Power Consumption | 30mA below | ||||||
| Output | NPN transistor open collector, 50mA max, Normal: ON | PNP transistor open collector, 50mA max, Normal: ON | |||||
| Functions | LED Lamp | Buzzer | Output Signal | ||||
| Normal Status | Green Stable ON | OFF | ON | ||||
| Leak Status | Red Flicker ON | ON | OFF | ||||
| Wrong location | Red Flicker ON | OFF | OFF | ||||
| Control Unit | Available with RS-3000C | Available with RS-3500C | |||||
| Ambient Temperature | -10 to 60˚C (14 to 140˚F) | ||||||
| Material | Case | PFA | |||||
| Cable | FEP | ||||||
| LED Lamp | Epoxy (Embedded in the case) | ||||||
| Waterproofing | Sealed, Equivalent IP67(IEC) | ||||||
| Weight | Approx. 55g | ||||||
| Absorbent Paper | Not Required | ||||||
| Selectable Bracket | P/N-6716 : Stainless Steel P/N-6720B : PVC |
| RS-3000 Series Control Unit Specification | |
| RS-3000C | |
| Input Voltage | 24 VDC ± 10% |
| Power Consumption | 200mA below |
| Number of Input | 1 to 8 detection units max |
| Indication of LED | Independent display for each Input (LED 8ea ×Green or Red either color) Normal status: Greed, Leakage or Wrong Position Alarm: Red |
| Output | Relay contact × 1ea Normal status: Closed Leakage or Wrong Position Alarm: Open Power Failure: Open |
| Output Capacity | 24 VDC,1A (resistance load) |
| Ambient Temperature | -10 to 60˚C (14 to 140˚F) |
| Case Material | ABS polymer |
| Weight | Approx. 100g |
| Wiring Connection | Input: Connector × 8ea (insert - locked) Power/Output: Connector × 1ea (insert - locked) |
| Installation | Snap-on DIN Rail, or screwed on the base plate. |
| Detection Unit | RS-3000FA, RS-3000FAP |
| RS-3500 Series Control Unit Specification | |
| RS-3500C | |
| Input Voltage | 24 VDC ± 10% |
| Power Consumption | 200mA below |
| Number of Input | 1 to 8 detection units max |
| Indication of LED | Independent display for each Input (LED 8ea ×Green or Red either color) Normal status: Greed, Leakage or Wrong Position Alarm: Red |
| Output | Relay contact × 1ea Normal status: Closed Leakage or Wrong Position Alarm: Open Power Failure: Open |
| Output Capacity | 24 VDC,1A (resistance load) |
| Ambient Temperature | -10 to 60˚C (14 to 140˚F) |
| Case Material | ABS polymer |
| Weight | Approx. 100g |
| Wiring Connection | Input: Connector × 8ea (insert - locked) Power/Output: Connector × 1ea (insert - locked) |
| Installation | Snap-on DIN Rail, or screwed on the base plate. |
| Detection Unit | RS-3500FA, RS-3500FAP |